How Much Does Sealcoating Cost in the Sacramento Valley?
A national cost guide updated October 9, 2026 puts driveway sealing at $176 to $444. Its national average is $305. For asphalt, it gives a rate of $0.15 to $0.23 per square foot. Its extremes run from $110 at the low end to $1,230 at the high end.
These are market numbers, not our price list, and they are national, not local. Size, cracks, cleaning and access set the real price on a valley driveway or lot. Trinity Paving and Concrete handles asphalt sealcoating for driveways and parking lots within about 40 miles of Dixon. We look at the job and put the quote in writing.
How much does it cost to sealcoat a driveway?
The first guide’s rate makes a quick estimate by size. The middle column multiplies each size by $0.15 and $0.23. The last column comes from a second national guide’s 2026 size table.
| Driveway size | Square feet | At $0.15 to $0.23 per square foot | Second guide (average total) |
|---|---|---|---|
| 12 x 24 feet (1 car) | 288 | $43 to $66 | $290 to $580 |
| 20 x 20 feet (2 cars) | 400 | $60 to $92 | $400 to $800 |
| 24 x 24 feet (2 cars) | 576 | $86 to $132 | $580 to $1,200 |
| 24 x 36 feet (3 cars) | 864 | $130 to $199 | $860 to $1,700 |
| 12 x 100 feet (rural drive) | 1,200 | $180 to $276 | $1,200 to $2,400 |
| 12 x 250 feet (rural drive) | 3,000 | $450 to $690 | $3,000 to $6,000 |
The second guide’s table has no long rural drive. Those two rows use its total of $1.00 to $2.00 per square foot for materials and labor.
The two guides sit far apart. The second guide puts labor alone at $0.90 to $1.50 per square foot.
Small jobs run high on any rate. At the first guide’s rate, a 20 x 20 foot driveway comes in under that guide’s own $110 low end. The second guide says a small driveway may cost more to meet a contractor’s minimum charge. Use the table as a range to check a quote against, not as a price.
What does parking lot sealcoating cost?
A national guide’s asphalt parking lot page, updated June 20, 2026, puts professional sealcoating at $0.15 to $0.30 per square foot. Here is that rate across common lot sizes.
| Lot area | At $0.15 to $0.30 per square foot |
|---|---|
| 5,000 square feet | $750 to $1,500 |
| 10,000 square feet | $1,500 to $3,000 |
| 20,000 square feet | $3,000 to $6,000 |
| 40,000 square feet | $6,000 to $12,000 |
A lot’s bill carries line items a driveway does not.
- Restriping. Sealer covers every painted line, so the lot gets restriped once the sealer cures. One national guide’s lot page puts striping at $4 to $5 per standard stall. It lists $25 to $40 per accessible stall. Our parking lot striping page covers that step.
- Accessible parking. The federal Access Board’s ADA guide treats resealing a lot as an alteration. The accessible spaces then need to meet the guide’s scoping table when the lines go back down. The building department answers that for a given lot. Our guide to ADA parking requirements in California explains the table.
- Working in sections. A business that stays open is often sealed one section at a time, around its hours. Each section needs its own drying time, so phasing can add trips.
- Repairs first. Potholes, failed patches and alligator cracking get fixed before any sealer goes down. Our parking lot repair page covers that work.
What adds to the cost of sealcoating?
These items show up on driveway and lot quotes alike.
- Cleaning. The first guide says a wash may cost extra, though some contractors bundle it in. The second guide prices a professional wash at $100 to $260 for a driveway. Contractors typically clean off debris, oil and dirt before sealing, it adds.
- Crack filling and patching. Caltrans maintenance guidance says cracks give surface water a path into the pavement structure. So cracks get filled before any sealer goes down, with asphalt crack sealing. The second guide puts driveway repair at $100 to $400 for small cracks and holes.
- Oil spots. Oil spots get cleaned and treated before the sealer goes on, so a driveway or lot with heavy staining takes longer to prep.
- Number of coats. The second guide says a contractor may recommend two coats. A second coat adds material and labor to the bill.
- Condition and access. The second guide ties its labor rate to the condition of the surface and how easy it is to reach. A long rural drive or a tight lot can take more time.
How do you get a written sealcoating quote?
Published ranges are a starting point, not a price. The square footage, the cracks and patching, the cleaning and the number of coats set the real number. On a lot, add restriping and any phasing around business hours.
The calendar matters too. NOAA climate normals for the Davis weather station put 84 percent of a normal year’s rain in November through March. So sealcoating here happens in the dry months. Our guide on how often to sealcoat a driveway covers the time between coats and the spring and fall windows.
Trinity Paving seals driveways and parking lots across Solano, Yolo and Sacramento counties. We look at the job and put the quote in writing. See how our driveway and parking lot sealcoating works, or call or text (707) 396-7730.